Teak & Holly Cabin Sole for Bertram 28
We have made the pictures here intentionally larger so load time may take longer on dialup. These are digitals of the cabin sole in our shop and after our customer installed it on their Bertram 28.
Remember – we are a custom shop. Your items starts off as rough lumber and end up with your dream item.
Custom engineered cabin sole for a 28 Bertram.
Hand made 1/4″ veneer finished thickness ¾”
Teak 2 3/8″ wide,
Holly 1/4″ wide,
Both 1/4″ thick.
Laminated to 1/2″ thick mahogany plywood,
Type 1 marine adhesive.
Finished thickness 3/4″,
We build all hatch sections and trim around all hatches, inside and out, where the hatch fits into the sections with 3/4″ solid teak.
Varethane Marine Finish – Gloss
It was built from templates and pictures from our customer.
Hatch Hardware – Recessed Stainless Steel Pull Rings
The photo on the right shows the teak and holly cabin sole pulled apart so you can see the separate sections. The hardest parts of this cabin sole are the sides that are very narrow
Teak and Holly Step for the 28 Bertram. Custom Built Step according to drawing mailed in. Size = 24.25″ X 11″
Here is the above teak and cabin sole installed in the 28 Bertram. We want to thank Eddy for sending these to us. He did a great job installing. You can see the step on the bottom of the picture. Traditionally steps are solid teak rather than teak and holly but our customer wanted it teak and holly. This is the look you get.
Here is the above teak and cabin sole installed in the 28 Bertram. We want to thank Eddy for sending these to us. He did a great job installing. You can see the step on the bottom of the picture. Traditionally steps are solid teak rather than teak and holly but our customer wanted it teak and holly. This is the look you get.
Teak and holly Cabin Sole for a 28 Bertram installed by the owner of the boat.
